Runcam Eagle and Foxeer Monster Comparison.

bonafidepirate 20.09.2016 0 Просмотры

Описание

I mounted both cams on a quad and flew them, using a camera switch to switch back and forth. While they are very similar in design, form, and function, the Eagle clearly outperforms the Monster, but it also costs more money. You decide! lol Camera settings are below:

Runcam Eagle:
Day/Night - Auto
Video Standard - NTSC 60Hz
3DNR - Auto
WDR - On
Brightness - 12
Zoom - 0
Sharpness (Detail) - Manual, 2
Sharpness (Edge) - Manual, 2
Saturation - Manual, 15 (maxed)

Foxeer Monster:
Exposure - Std, Brightness Middle
Shutter Mode - Auto, Slowshutter 1X
AGC - Mode ON, Intensity LOW
AWB - ATW1
Sharpness - 65/100
HDNR - 20/100
3DNR - 0/100
Contrast - 50/100
Saturation - 50/100
R Gain - 50/100
G Gain - 45/100
B Gain - 50/100
Day/Night - Auto, D Ctrl 0/100, day2night 80/100, night2day 70/100
TV Gamma - Middle
TV Bright - Low
TV System - NTSC
HLC - Off, blackness 0/100 .

__

Patreon: https://www.patreon.com/bonafidepirate

You can help to support my channel by using the affiliate links below when making a purchase:

Banggood - http://bit.ly/piratebgood
eBay - http://ebay.to/2r7k3mb
Amazon - https://www.amazon.com/shop/bonafidepirate
Foxeer - http://www.foxeer.com/?u=499

You can also make a donation if you wish to do so at the following link:

Support my channel and my efforts to bring you better content, every little bit helps! http://paypal.me/keithluneau


Here's some affiliate links to the video gear I use from Ready Made R/C:

1.3GHz video transmitters (I use 200, 400, 800, and 1500mW on various planes) https://goo.gl/Mhq6TW

I recommend this receiver to go with them. I use an older Racewood type they used to sell, but these are supposed to be at least as good with the same Comtech tuners in them. Apparently Racewood is no longer in business, so here's what replaced them: https://goo.gl/xC2RLx

I use this 8dbi Patch Antenna, it has been my go-to antenna for a long time now, for years! lol I've been out more then 10 miles using one of these and the 800mW vtx listed above: https://goo.gl/hGmcNS

On the transmitter side, the stock dipoles that come with them work pretty good together with that patch, but if you want slightly better performance and less weight/drag, consider these: https://goo.gl/CPuFGf